2015年1月12日星期一

Microfiber towels Features

The main absorbent towel material is microfiber, the fiber fineness of the microfine fiber diameter of 0.4μm silk only 1/10. Imports from the loom made of cloth towels, and its surface properties of uniform, compact, soft, high elasticity of the fine cashmere Mission, a strong decontamination, water absorption. To be polished surface without the slightest injury, common cilia do not produce cotton fabric falling; washable, and durable.
Microfiber towels comparison with the traditional cotton towels, microfiber towels are six main features:
1. High water absorption: microfiber using orange petal type technology will filament into eight petals, the fiber surface area increases, the increase in porosity fabric, with the help of capillary wicking effect enhanced absorption effect. Rapid absorption and dries quickly become its notable features.
2. Strong detergency: 0.4μm diameter micro-fiber fineness of silk is only 1/10 of its special cross-section can more effectively capture small dust grains to several microns, decontamination, to the effect of the oil is very obvious.

3. Do not shed: high strength synthetic fiber filament, not broken, while using fine weave, not spinning, not off circle, fiber is not easy to fall off from the surface of the towel. It is made with a clean towel to wipe, especially for Cache towels to wipe the surface of bright paint, plating surface, glass, gauges and LCD screen, etc., in the automotive glass film during the course of doing the cleaning process can achieve ideal foil effect.(Car Cleaning Products)

4. Long life: As the ultra-fine fiber strength, toughness, and therefore it is more than four times the life of an ordinary towel service life, many times after washing is still degeneration, while the polymer fibers such as cotton fibers that do not produce protein hydrolysis, even after use is not dry, it will not mildew, rot, has a long life.
5. easy to clean: when using ordinary towel, especially natural fiber towel, wipe the surface to be dust, grease, dirt, etc. directly absorbed inside the fibers, the fibers being residual after use, easy to remove, with a longer time will harden even after the loss of elasticity, affect the use. The microfiber towel is adsorbed on the dirt between the fibers (rather than inside the fiber), coupled with high fiber fineness, density, so the strong adsorption capacity, after use just a little with water or detergent can be.
6. Do not fade: dyeing process using TF-215 and other dye for microfiber material, slow dyeing, dye transfer, high temperature dispersion, achromatic targets were met the stringent standards of the international export market, particularly in its advantages of not fade, making cleaning materials when the surface is completely decolorized not bring pollution problems.

没有评论:

发表评论